The MCS400EC
is a fully customizable ECU for advanced research and
development, and it is capable of controlling injectors /
ignitions up to 12 cylinders together with the breakthrough
feature called
crank analyzer.
The MCS400EC is loaded with already known features and
functions of MCS400 series such as powerful DriveRecorder.
Virtually any number
of signals from any source can be stored into a circular buffer
of up to 16 GB size at speeds of 10 MB/s.
The circular buffer can be emptied
at any time - even while the recording is in progress, to
allow data recordings without gaps over very long periods.
Retrieval of recorded data over LAN or USB2.0 is at speeds
of 300 MB/minute. Smart on-the-fly data processing allows
previews of the entire recording to be uploaded in seconds.
The recorder is fail-safe even in case of power loss and is
auto-resuming when power returns.
|
|
With the I/O-Interfaces an external
analog and/or digital data aquisition is possible. If you
use the digital-input for the crank-position you could
analyze the datas by the internal crank analyzer.
Or you use them to work with the Rapid Prototyping as you
know it form the former MCS4/MCS400 with Matlab/Simulink.
It is possible to get a Development Environment with up to
20 inputs/outputs free of charge.
Built
around the Freescale MPC5200, the MCS5 delivers
a performance of 760 MIPS (million instructions per second)
. The on-chip double precision FPU and the proven, robust
VxWorks 5.5 RTOS make the platform ideally suited for
running
Rapid Prototyping applications concurrently with it's system
tasks.
|
|
Technical Data |
|
• 2 x 400 MHz Freescale MPC5200 PowerPC delivering 760 MIPS
• on-chip double precision Floating Point Unit, 128 MB RAM
• VxWorks Real Time Operating System
• Dimensions (mm): depends on configuration
• Temp. range: -40 to +85 °C operating
• Power Supply: 4V to 60V
• Power Dissipation: depends on configuration
• Special enclosures, connectors and pin assignments are also
customizable. |
|
Display |
|
• Depends on customized configuration |
|
Interfaces to Host-PC |
|
• Ethernet 10/100
• USB 2.0 |
|
Interfaces to peripherals |
|
• Depends on customized configuration (CAN 2.0B, AUD/JTAG,
other communication interface)
|
|
Options |
|
• Fully customizable
|
|
I/O Peripherals
(an example for minimum configuration) |
|
•
4 x
ignition drive
(Max. 300mA)
•
8 x
injection drive
(Max.2.2A / 70V)
•
16 x
1kSps analog inputs
16bits
(3.3V/5V)
• 8 x Analog Inputs 0..5V, 12 Bits (up to 100kSps or vs. crank angle at 0.5° resolution)
• 8 x Digital 3.3V/5V bidirectional (up to 10MHz or vs. crank angle at 0.05° resolution)
•
2 x
Thermo couple
•
3 x
Hi-Bridge DC servomotor output
(Max.
7A)
•
8 x
standard power output
(Low
side,Max.
2.2A)
• shaft speed sensing (crank, cam, ...) by inductive pick-up or DHE |
|
Drive Recorder |
|
• High Speed 1 GB Flash Drive (optional: 16GB; 8 GB linear, 4 GB ring buffer, 4GB user Network drive)
|
|
Network Functionality |
|
• DHCP server or fixed IP Address Support
• Auto MDI / MDIX crossover select |
|
CAN, CCP and XCP Functionality
(when CAN interface is selected as an communication interface) |
|
• ECU Calibration & data acquisition over CCP and XCP (up to 20 ECUs simultaneously)
• ECU Flash programming over CCP and XCP
• CAN data acquisition & bus monitoring
• CAN bus termination software selectable |
|
Cost |
|
• Special offer till Jun.30.2010: we also change competitive products with 40% discount
|